#Amiga Workbench 3.1 Hdf install
#Amiga Workbench 3.1 Hdf update
#Amiga Workbench 3.1 Hdf Patch
#Amiga Workbench 3.1 Hdf upgrade

AmigaOS 3.1.4 however negates all of that and you can at your leisure partition your CF card without going that extra mile.

#Amiga Workbench 3.1 Hdf Patch

Unlike before you had to patch your vice so it can see CF, SD card or even SSD HDD above 4Gb and then you had to use a different file system other than FFS (Fast File System) for something like PFS3 AIO (Professional File System 3 All in One) which is my personal choice or another choice is SFS (Smart File System). Partitioning your CF Card (SD or even an SSD HDD) Press OK and OK again at the next screen, you will then be asked вЂњAre you sure you want to change the drive type for the current drive?вЂќ simply press Continue. Mine as you can see is a 16Gb Sandisk :-). You will see once complete it will correctly identify your CF Card. Select Change Drive TypeВ then select Define NewвЂ¦В now select Read ConfigurationВ (click Continue).First we need to prepare or CF Card and you can do that via HDTools which is in Install3.1.4 -HDTools вЂ“ HDToolBox.

#Amiga Workbench 3.1 Hdf install

Ok lets start, insert the disk or choose the slot that has the disk Install 3.1.4 You have 2 options, you can go old skool and transfer the ADF files to real floppy disks (6 required) using an Amiga, there are a few programs out there that can do this, for example, TSGuiВ and Xcopy or you could use a Gotek drive and slot in each ADF file, again 6 slots required. You will only need to do this if the flash ROM has been garbled вЂ“ in that case, the bootable floppy will serve as a recovery-disk.

*The unpacked file is an ADF image that can also be written to a floppy disk.

Follow the instructions on screen to install the update.

The Amiga will boot into Shell and read the ADF file on the AUX CF card.

Press F8В and then FВ to launch the flash updater.

Once complete Insert the CF card into the AUX slot of your ACA500Plus, then launch the ACA500Plus menu.

Once downloaded, unzip it on to a CF card, one that can be used in the AUX slot of your ACA500Plus.

#Amiga Workbench 3.1 Hdf update

Download the update from iComp here Menu System v0.127.

#Amiga Workbench 3.1 Hdf upgrade

I do recommended that you upgrade your ACA500Plus Menu System (currently v0.1).

A CF card (any size even above 4Gb!) IвЂ™m using a 16Gb Sandisk CF Card.

Mount the ADF files either to a Gotek or transfered ADFвЂ™s to Floppy disks (6 disks required but I used a Gotek).Downloaded 3.1.4 Zip package and unpacked the files.Have purchased AmigaOS 3.1.4, you can do so from Hyperion here or from us here.I have also installed an ACA1221EC, however this has no bearing on installing 3.1.4 and is not required or needed. Installing AmigaOS 3.1.4 is pretty easy, especially if you have a large CF card ( > 4Gb), so in this guide I installed from scratch, Amiga OS 3.1.4 to a Sandisk 16Gb CF Card on an Amiga 500 Plus with 2Mb Chipram with an ACA500Plus. But this guide can be used with any stock Amiga (Amiga 500,600,1200,2000, 3000,4000) not just if you have an ACA500Plus. This is a follow up to another guide: Using ACA500Plus MapRom to map kickstart 3.1.4. CrossDOS is now more tolerant to wrongly configured mountlists and foreign character sets.

HDToolBox now suggests more adequate block sizes for large drives.vice got improved compatibility with some non-standard programming practices.Setpatch now has the ability to load both an vice and a Shell-Seg update by itself.Danish (dansk) and swedish (svenska) AmigaOS catalogs.Its is mainly bug fixes but it does have a few features added: July 2019 Update: Hyperion Entertainment CVBA have released AmigaOS 3.1.4.1В as a free update to AmigaOS 3.1.4 released in September 2018. NOTE: We are now official Hyperon resellers and now able to sell licenced copies of AmigaOS 3.1.4, full services available here